Clear and color Acrylic Sheet cast extruded made in China

Short Description:

Extruded acrylic is transparent, moisture resistant and half the weight of glass, but many times stronger. 


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Product Detail

    FAQ

    Product Tags

    EXTRUDED CLEAR ACRYLIC SHEET

    Description:

    Extruded acrylic is made by continuously pushing acrylic mass through a form to yield an impact-resistant, heterogeneous product. Properties may vary depending upon the direction of extrusion. Extruded acrylic is more affordable and dimensionally stable than cast acrylic, making it a cost-effective solution in general fabrication and a wide range of applications. Due to its malleability and low melting point, this acrylic is better suited to laser cutting, routing, and polishing as well as cementing and thermoforming. Extruded acrylic is also less susceptible to dirt, lint, or particulate contamination in the production process. Plus, it will not yellow as the result of prolonged sun exposure due to its ability to resist ultraviolet light degradation. Despite cold, heat, humidity, and sunlight, our transparent acrylic sheets maintain original color and appearance. You can use extruded sheets in greenhouse glazing, shed or garage window installation, and a variety of indoor applications.

    The price of extruded board will be a little cheaper than that of cast board. If price is your pain point. Then I will give priority to recommending you to use the extrusion board. Extruded board is a cost-effective material in acrylic board.

    Product name Extruded clear acrylic sheetacrylic board,plexiglass,
    Color Clear/transparent
    Size 1250x2500;1220x2440;2000x3000(Width:900mm-2050mm; Length:900mm-8000mm)Note: any other size can custom made
    Raw material 100% recycled OR 100% virgin lucite/sumitomo/saudi aramco
    Thickness 0.5mm-18mm
    MOQ. 5 pieces

    picture

    Product properties:

    Properties Value Unit
    Specific gravity 1.19 g/cm³
    Water absorption 0.3 %
    Light transmission(clear sheet) 93.7 %
    Rockwell hardness 92.4 M scale
    Tensile strength 74.2 MPa
    Elongation at Break 5 %
    Vicat softening point 102 °C
    Deformation temperature on-load 106.3 °C
    Thermal shrinkage ratio 1.89 %
    Service Temperature scope -40~90 °C

    Plexiglass Sheets: Features and Benefits

    Approximately half the weight of glass

    Break-resistant and impact-resistant

    Resistance to weathering and aging

    Resistance to heat and chemicals

    Colorfast and continuous throughout

    Easy to bond and thermoform

    Size:

    1220 x 2440mm (4ft x 8ft)

    1220 x 1830mm (4ft x 6ft)

    2000 x 3000mm

    1220 x 1830mm

    extrued clear acrylic sheetextrued clear acrylic sheetextrued clear acrylic sheet

    CUSTOMIZED AVAILABLE

    Thickness:

    1.25mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 18mm, 20mm, 25mm, 50mm...etc,.

    CUSTOMIZED AVAILABLE

    Laser cutting service: We can do laser cutting referring to your requirement. Please send your design file so that we can discuss more.

    Finish: High gloss finish on both sides. Clear acrylic is clear like glass all the way through.

    Matte/Gloss features: Single-sided matte(one side is matte, one side is gloss) or both sides matte are available.

    Colour Accuracy: Contact us and leave a message to order samples here. Allow for minor colour variation from your monitor to real life; all screens display colours differently.

    Protective Tape: Brown paper tape front and back. Contact us to replace with masking tape or double sided tape.

    Please note prices may vary from those listed from colours, sizes and thickness, due to different manufacturing techniques.

    Additional photos and information:To see more, refer to our comprehensive material gallery or view videos and other details on our Facebook and Alibaba page.

    Packing: 

    1. Both size packing with PE film or craft paper.

    2. One standard export wood pallet packing 1000 to 2000kg 

    3. For 20ft container can load 10-15 tons, 40ft container can load 25 tons.

    picturepicturepicturepicture详情页(终)2_04详情页(终)2_05

    Contact us:  

    Please contact our sales GM Ms. Wing as follows:

        name  Wing Kar

        phone +86-139 2999 9810 (Whatsapp)

        phone+86-181 3853 6118(Whatsapp)

        email xishunplastic@garychina.com


  • Previous:
  • Next:

  • 1.What’s the production lead time?

    About 30 days, which depands on the order quantity.

     

    2.Do you accept any customization orders?

    Yes, we are open to size and color customization.

     

    3.How do you control the quality?

    We will make samples before mass production, and will start mass production only against the customer’s apporval on related sample. 100% on-spot inspection will be carried out during production and will do random inspection before packing .

     

    4.How about the payment?

    30% deposite after sales contract confirmed by both sides, and 70% balance before B/L releaesd.

     

    5.May I visit your Factory?

    Sure, you’re welcome to visit us ! Please contact and inform us your visiting schedule and we will arrange pick-up as well as hotel reservation for you. We can offer assistance during your visit in China.

  • Write your message here and send it to us